2-Phase

Great range of 2-Phase Open Loop Stepping Systems
  Product Categories

RTA Stepping motor drive boxed A-CSD 94 ( ADVANCED )

New series of bipolar microstep stepping motor drives, specifically developed for applications sensitive to acoustic noise and vibration. Significant evolution of the CSD series, preserving backward mechanical, electrical and applicative compatibility.   Target: advanced applications requiring high precision, smoothness of movement and low acoustic noise.
 Download Catalog

HIGHLIGHTS


► Full digital microstepping drive.
► Adaptive microstepping up to 3.200 step/rev.
► Intelligent management of the current profile that achieves good results in terms of smoothness of movement, low noise and vibration control.
► A highly sophisticated control system, preserving anyhow the traditional ease of use of R.T.A. drives.

TECHNICAL SPECIFICATIONS

► Version: drive housed in a metallic box 90 x 99 x 21 mm, equipped with plug-in connectors.
► Range of operating voltages: 24-48 VDC.
► Range of current: 2.6-4.4 Amp. Setting up to eight possible values by means of a dip-switch.
► Microstepping: 400, 800, 1.600 and 3.200 steps/revolution. Setting by means of dip-switches.
► Automatic current reduction at motor standstill.
► Management of the current profile setting by means of a dip-switch.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
► Warranty: 24 months.

 Contact Us About This Product

SanMOTION F2

Includes a driver and a high torque motor for a DC input set model (unipolar/bipolar specifications) with a basic step angle of 1.8°, and covers a wide variety of applications, including industrial sewing machines, financial terminals, copiers and manufacturing equipment for semiconductors.
 Download Catalog
Spec
Driver
Electric power supply Input mode
AC driver AC 100 to 240 V* Pulse
DC driver DC 24 V / 36 V Pulse

*42 mm motor: electric power supply AC 100 V to 120 V


Stepping motor
Motor size Basic step angle
14mm 1.8°
28mm 1.8°
42mm 1.8°
50mm 1.8°
56mm 1.8°
60mm 1.8°
86mm 1.8°
Ø106mm 1.8°
 Contact Us About This Product

Ezi-Step ST Micro Stepping System

For high speed and high precision drive of stepping motors, Ezi-STEP ST is a unique drive that adopts a new control scheme due to an on-board high performance digital signal processor and software(DSP).With a unique position estimation algorithm, it instantaneously detects an out of synchronization of the stepping motor rotor, which is not available with a conventional stepping motor and drives.
  • Micro Stepping
  • Sensorless Stall Detection
  • Software Damping
  • Run / Stop Signal Output
 Download Page
Spec
Motor Model BM-20 Series BM-28 Series BM-42 Series
Driver Model EzStep-MNB-20 Series EzStep-MNB-28 Series EzStep-MNB-42 Series
Input Voltage
24VDC±10%
Control Method Bipola PWM dirve with 32bit DSP
Current Consumption MAX 500mA (Except motor current)

Operation

Condition

Anbient

Temperature

In use: 0~50℃ In Storage: -20~70℃
Humidity In use : 35~85%RH (Non-condensing) In Storage : 10~90%RH (Non-condensing)
Vib. Resist. 0.5G
Function Resolution(P/R) 500 1,000 1,600 2,000 3,200 3,600 4,000 5,000 6,400 8,000 10,000

20,000 25,000 36,000 40,000 50,000 (Set by DIP Switch) *Default : 10,000

Max. Input Pulse

Frequency

500KHz (Duty 50%)

Protection

Functions

Over current, Over speed, Step out, Over temperaturem, Over regenerated voltage,

Motor connect error, Motor voltage error, System error, ROM error, Input voltage error

(Identifiable which alarm is activated by counting the blinking times of status monitor LED)

LED Display Power status(Green), Alarm status(Red)

, CW Rotation(Yellow), CCW Rotation(Orange)
STOP Current 10%~100% (Set by DIP Switch) Be setted to set value of STOP

Current after 0.1 second after motor stop *Default : 50%

Pulse Input Method 1 Pulse/2 Pulse (Set by DIP Switch)

1 Pulse : Pulse/Direction, 2 Pulse : CW/CCW *Default : 2 Pulse

Rotational Direction CW/CCW (Set by DIP Switch)

Used when changing the direction of motor rotate*Default : CW

Speed / Position

Control command

Pulse train input (Photocoupler input)

I / O

SIgnal

Input Signal Motor Free/Alarm Reset (Photocoupler input)
output Signal Alarm, Run/Stop (Photocoupler output)
 Contact Us About This Product

Ezi-Step BT Micro Stepping System

High speed, high precision drive and stepping motor integrated into one package, Ezi-STEP is unique as it adopts a new control scheme based on a built in high performance DSP(Digital Signal Processor) and software. Ezi-STEP utilizes a unique position estimation algorithm which instantaneously detects out of synchronization of the stepping motor rotor, which is not available with conventional stepping motor & drives.
  • Micro Stepping with Integrated Drive
  • Sensorless Stall Detection
  • Software Damping
  • Run/Stop Signal Output
 Download Manuals Download Catalog
Spec
Motor Model BT-42 Series BT-56 Series BT-86 Series
Input Voltage 24VDC ±10% 24VDC ±10% 40~70VDC
Control Method Bipola PWM dirve with 32bit DSP
Current Consumption MAX 500mA (Except motor current)

Operation

Condition

Anbient

Temperature

In use : 0~50℃ In Storage : -20~70℃

Humidity In use : 35~85%RH (Non-condensign) In Storage : 10~90%RH (Non-condensign)

Vib. Resist. 0.5G

Function Resolution(P/R) 500 1,000 1,600 2,000 3,200 3,600 4,000 5,000 6,400 8,000 10,000

20,000 25,000 36,000 40,000 50,000 (Set by DIP Switch) *Default : 10,000

Max. Input Pulse

Frequency

500KHz (Duty 50%)

Protection

Functions

Over current, Over speed, Step out, Over temperaturem, Over regenerated voltage,

Motor connect error, Motor voltage error, System error, ROM error, Input voltage error

(Identifiable which alarm is activated by counting the blinking times of status monitor LED)

LED Display Power status(Green), Alarm status(Red)

STOP Current 10%~100% (Set by RS-232C Communication) Be setted to set value of STOP

Current after 0.1 second after motor stop *Default : 50%

Pulse Input Method 1 Pulse/2 Pulse (Set by RS-232C Communication)

1 Pulse: Pulse/Direction, 2 Pulse: CW/CCW *Default : 2 Pulse

Rotational Direction CW/CCW (Set by RS-232C Communication)

Used when changing the direction of motor rotate*Default : CW

Speed / Position

Control command

Pulse train input (Photocoupler input)

I / O

SIgnal

Input Signal Motor Free/Alarm Reset (Photocoupler input)

Output Signal Alarm, Run/Stop (Photocoupler input)

 Contact Us About This Product

Ezi-Step MINI Micro Stepping System

Ezi-STEP MINI’s on-board high-performance digital signal processor and proprietary algorithms allow the Ezi-STEP MINI to operate a high speeds with unmatched precision. The unique position estimation algorithm instantaneously detects out-of-synchronization based on the rotor position of the stepping motor, which is not an easy task in a conventional stepping motor and drives (effective only over 300 rpm.)
  • Micro Stepping
  • Sensorless Stall Detection
  • Software Damping
  • Run / Stop Signal Output
 Download Manuals Download Catalog
Spec

Ezi-Step MINI Micro Stepping System

Motor Model BM-20 Series BM-25 Series BM-28 Series BM-35 Series BM-42 Series
Driver Model EzStep-MI-20 Series EzStep-MI-25 Series EzStep-MI-28 Series EzStep-MI-35 Series EzStep-MI-42 Series
Input Voltage
24VDC±10%
Control Method Bipola PWM dirve with 32bit DSP
Current Consumption MAX 500mA (Except motor current)

Operation

Condition

Anbient

Temperature

In use: 0~50℃ In Storage: -20~70℃
Humidity In use : 35~85%RH (Non-condensing) In Storage : 10~90%RH (Non-condensing)
Vib. Resist. 0.5G
Function Resolution(P/R) 500 1,000 1,600 2,000 3,200 3,600 4,000 5,000 6,400 8,000 10,000

20,000 25,000 36,000 40,000 50,000 (Set by DIP Switch) *Default : 10,000

Max. Input Pulse

Frequency

500KHz (Duty 50%)

Protection

Functions

Over current, Over speed, Step out, Over temperaturem, Over regenerated voltage,

Motor connect error, Motor voltage error, System error, ROM error, Input voltage error

(Identifiable which alarm is activated by counting the blinking times of status monitor LED)

LED Display Power status(Green), Alarm status(Red)

, CW Rotation(Yellow), CCW Rotation(Orange)
STOP Current 10%~100% (Set by DIP Switch) Be setted to set value of STOP

Current after 0.1 second after motor stop *Default : 50%

Pulse Input Method 1 Pulse/2 Pulse (Set by DIP Switch)

1 Pulse : Pulse/Direction, 2 Pulse : CW/CCW *Default : 2 Pulse

Rotational Direction CW/CCW (Set by DIP Switch)

Used when changing the direction of motor rotate*Default : CW

Speed / Position

Control command

Pulse train input (Photocoupler input)

I / O

SIgnal

Input Signal Motor Free/Alarm Reset (Photocoupler input)
output Signal Alarm, Run/Stop (Photocoupler output)
 Contact Us About This Product

Ezi-Step ALL Micro Stepping System

High speed precision microstep drive, controller and stepping motor integrated into one robust package, Ezi-STEP ALL is unique due to its new control scheme based on a built in high performance DSP(Digital Signal Processor) and software. The onboard controller eliminates costly support systems and can easily digitally network up to 16 axis together to a host controller or operate stand alone.
  • Motor + Drive + Controller + Network
  • Embedded Controller
  • Micro Stepping
  • Sensorless Stall Detection
  • Software Damping
  • Run / Stop Signal Output
 Download Page
Spec
Input Voltage 24VDC ±10%
Control Method Bipola PWM dirve with 32bit DSP
Multi Axes Drive Maximum 16 axes through Daisy-Chain
Position Table 64 motion command steps (Continuous, Wait, Loop, Jump and External start etc)
Current Consumption MAX 500mA (Except motor current)

Operation

Condition

Anbient

Temperature

In use: 0~50℃ In storage: -20~70℃
Humidity In use: 35~85%RH (Non-condensing) In Storage: 10~90%RH (Non-condensing)
Vib. Resist. 0.5G
Function Rotation speed 0~3,000rpm
Resolution(P/R) 500 1,000 1,600 2,000 3,200 3,600 4,000 5,000 6,400 8,000 10,000

20,000 25,000 36,000 40,000 50,000 (Selectable by parameter) *Default : 10,000

Protection

Functions

Over current, Over speed, Step out, Over temperature, Over regenerated voltage

Motor connect error, Motor volage error, System error, ROM error, Input voltage error

7-Segment Power, Alarm, Communication ID
Stop Current 10%~100% (Selectable by parameter)

Be setted to set value of STOP current after 0.1 second after motor stop. *Defailt : 50%

Rotational Direction CW/CCW (Selectable by parameter)

Used when changing the direction of motor rotate *Default : CW

I / O

SIgnal

Input Signal 3 dedicated output (LIMIT+, LIMIT-, ORIGIN), 7 programmable input ((Photocoupler)
Output Signal 1 dedicated output (Compare Out), 1 programmable output (Photocoupler), Brake Signal

Communication

Interface

The RS-485 serial communication with PC

Transmission speed : 9,600~921,600bps

Position Control

Incremental mode / Absolute mode

Data Range : : -134,217,727 to +134,217,727pulse, Operating speed : Max. 3,000rpm

Return to Origin Origin Sensor , ±Limit sensor, Z phase (Bu connect external encoder)
GUI User Interface program within Windows
Software Motion Library (DLL) for Windows 2000/XP
 Contact Us About This Product

Ezi-Step Plus-R MINI Micro Stepping System

A maximum of 16 axis can be operated from a PC through RS-485 communications. All of the Motion conditions are set through the network and saved in Flash ROM as a parameter. Motion Library(DLL) is provided for programming under Windows 2000/XP.
  • Network Based Motion Control
  • Drive Output Signal Monitoring
  • Position Table Function
  • SoftwareDamping
  • Microstep and Filtering
  • Improvement of High Speed Driving
  • Sensorless Stall Detection
 Download Page
Spec
Motor Model BM-20 series BM-25 series BM-28 series BM-35 series BM-42 series
Driver Model EzT-NDR-MI-20

series

EzT-NDR-MI-25

series

EzT-NDR-MI-28

series

EzT-NDR-MI-35

series

EzT-NDR-MI-42

series

Input Voltage
24VDC ±10%
Control Method Bipola PWM dirve with 32bit DSP
Multi Axes Drive Maximum 16 axes through Daisy-Chain
Position Table 256 motion command steps (Continuous, Wait, Loop, Jump and External start etc)
Current Consumption MAX 500mA (Except motor current)

Operation

Condition

Anbient

Temperature

In use: 0~50℃ In storage : -20~70℃
Humidity In use: 35~85%RH (Non-condensing) In storage: 10~90%RH (Non-condensing)
Vib. Resist. 0.5G
Function Rotation speed 0~3,000rpm
Resolution(P/R) 500 1,000 1,600 2,000 3,200 3,600 4,000 5,000 6,400 8,000 10,000

20,000 25,000 36,000 40,000 50,000 (Selectable by parameter) *Default : 10,000

Protection

Functions

Over current, Over speed, Step out, Over temperature, Over regenerated voltage

Motor connect error, Motor volage error, System error, ROM error, Input voltage error

LED Display Power, Alarm, CW Rotation, CCW Rotation
STOP Current 10%~100% (Selectable by parameter)

Be setted to set value of STOP current after 0.1 second after motor stop. *Default : 50%

Rotational Direction

CW/CCW (Selectable by parameter)

Used when changing the direction of motor rotate*Default : CW

I / O

Signal

Input Signal 3 dedicated input (LIMIT+, LIMIT-, ORIGIN), 9 programmable intput (Photocoupler)
output Signal 1 dedicated output (Compare Out), 9 programmable output (Photocoupler), Brake signal

Communication

Interface

The RS-485 serial communication with PC

Transmission speed : 9,600~921,600bps

Position Control Incremental mode / Absolutemode

Data Rande : -134,217,727 to +134,217,727pulse, Operation speed: Max 3,000rpm

Return to Origin Origin sensor, ±Limit sensor, Z phase (By external encoder)
GUI User Interface program within Windows
Sofeware Motion Library (DLL) for Windows 2000/XP
 Contact Us About This Product

Ezi-Step BK Micro Stepping System

Ezi-STEP BK Series, Fastrech's unit product, maximizes User's operational convenience with integration between Ezi-STEP Series of stepping motor and non-excitation electromagnetic brake that has big friction of brake torque and rapid brake timing. Also Ezi-STEP BK Series covers NEMA17, 23, 24 and 34 full range of standard stepping motor and it enables customer to select right product.
  • Apply non-excitation electromagnetic brake
  • Automatic Braking during power cutoff or blackout
  • Rapid Brake Timing
  • Long Durability
 Download Catalog
Spec
Different from excitation type of brake that only generates braking-power by electromagnetic-power when power supplies at brake and loses brake-power when power cutoff, Ezi-STEP BK Series adopts non-excitation electromagnetic brake that immediately generate friction of brake torque by inner spring’s binding post-tensioning force once power cutoff. So Ezi-STEP BK Series enables complete stopping of stepping motor and can forestall risks with brake’s mechanical braking-power under emergency situation as like sudden blackout in machine operation.

Ezi-STEP BK Series, Unit product, integrated between high performance of non-excitation electromagnetic brake and step motor that enables immediate braking to keep holding point and prevent falling under power cutoff or blackout during operation so user can be flexible in responding to sudden situation.

Ezi-STEP BK Series, non-excitation electromagnetic brake, enables rapid braking because loaded spring closed brake can quicken rising of brake torque.

Brake integrated into Ezi-STEP-BK Series applies long durability of brake wear plate
(Brake Lining) so it guarantees high durability and long life cycle.

 Contact Us About This Product

Ezi-Step Plus-R Micro Stepping System

Innovative, open loop stepping motor and motion control system which is suitable for low cost applications. A maximum of 16 axes can be operated from a PC through RS- 485 communication and it can be connected to Ezi-SERVO Plus-R, as well. All of the motion conditions are set through the network and are saved in flash ROM as a parameter. The Motion Library(DLL) is provided for programming under Windows 2000/XP/7/8. A maximum of 256 positions can be saved in flash ROM memory.
  • Intergrated Controller
  • Sensorless Stall Detection
  • Position Table
  • Software Damping
  • Micro Stepping
  • Run / Stop Signal Output
 Download Page
Spec
Motor Model

BM-20

series

BM-25

series

BM-28

series

BM-35

series

BM-42

series

BM-56

series

BM-60

series

BM-71

series

BM-86

series

Driver Model

EzT-NDR-

20 series

EzT-NDR-

25 series

EzT-NDR-

28series

EzT-NDR-

35 series

EzT-NDR-

42 series

EzT-NDR-

56 series

EzT-NDR-

60 series

EzT-NDR-

71 series

EzT-NDR-

86 series

Input Voltage
24VDC ±10%
40~70VDC
Control Method Bipola PWM dirve with 32bit DSP
Multi Axes Drive Maximum 16 axes through Daisy-Chain
Position Table 256 motion command steps (Continuous, Wait, Loop, Jump and External start etc)
Current Consumption MAX 500mA (Except motor current)

Operation

Condition

Anbient

Temperature

In use: 0~50℃ In storage : -20~70℃
Humidity In use: 35~85%RH (Non-condensing) In storage: 10~90%RH (Non-condensing)
Vib. Resist. 0.5G
Function Rotation speed 0~3,000rpm
Resolution(P/R) 500 1,000 1,600 2,000 3,200 3,600 4,000 5,000 6,400 8,000 10,000

20,000 25,000 36,000 40,000 50,000 (Selectable by parameter) *Default : 10,000

Protection

Functions

Over current, Over speed, Step out, Over temperature, Over regenerated voltage

Motor connect error, Motor volage error, System error, ROM error, Input voltage error

LED Display Power, Alarm, CW Rotation, CCW Rotation
STOP Current 10%~100% (Selectable by parameter)

Be setted to set value of STOP current after 0.1 second after motor stop. *Default : 50%

Rotational Direction

CW/CCW (Selectable by parameter)

Used when changing the direction of motor rotate*Default : CW

I / O

Signal

Input Signal 3 dedicated input (LIMIT+, LIMIT-, ORIGIN), 9 programmable intput (Photocoupler)
output Signal 1 dedicated output (Compare Out), 9 programmable output (Photocoupler), Brake signal

Communication

Interface

The RS-485 serial communication with PC

Transmission speed : 9,600~921,600bps

Position Control Incremental mode / Absolutemode

Data Rande : -134,217,727 to +134,217,727pulse, Operation speed: Max 3,000rpm

Return to Origin Origin sensor, ±Limit sensor, Z phase (By external encoder)
GUI User Interface program within Windows
Sofeware Motion Library (DLL) for Windows 2000/XP
 Contact Us About This Product

RTA Stepping motor drive boxed A-CSD 92 ( ADVANCED )

New series of bipolar microstep stepping motor drives, specifically developed for applications sensitive to acoustic noise and vibration.Significant evolution of the CSD series, preserving backward mechanical, electrical and applicative compatibility.   Target: advanced applications requiring high precision, smoothness of movement and low acoustic noise.
 Download Catalog

HIGHLIGHTS


► Full digital microstepping drive.
► Adaptive microstepping up to 3.200 step/rev.
► Intelligent management of the current profile that achieves good results in terms of smoothness of movement, low noise and vibration control.
► A highly sophisticated control system, preserving anyhow the traditional ease of use of R.T.A. drives.

TECHNICAL SPECIFICATIONS

► Version: drive housed in a metallic box 90 x 99 x 21 mm, equipped with plug-in connectors.
► Range of operating voltages: 24-48 VDC.
► Range of current: 0.7-2.4 Amp. Setting up to eight possible values by means of a dip-switch.
► Microstepping: 400, 800, 1.600 and 3.200 steps/revolution. Setting by means of dip-switches.
► Automatic current reduction at motor standstill.
► Management of the current profile setting by means of a dip-switch.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
► Warranty: 24 months.

 Contact Us About This Product

RTA Stepping motor drive open-frame A-CSD 04.V (ADVANCED)

New series of bipolar microstep stepping motor drives, specifically developed for applications sensitive to acoustic noise and vibration. Significant evolution of the CSD series, preserving backward mechanical, electrical and applicative compatibility.   Target: advanced applications requiring high precision, smoothness of movement and low acoustic noise.
 Download Catalog

HIGHLIGHTS


► Full digital microstepping drive.
► Adaptive microstepping up to 3.200 step/rev.
► Intelligent management of the current profile that achieves good results in terms of smoothness of movement, low noise and vibration control.
► A highly sophisticated control system, preserving anyhow the traditional ease of use of R.T.A. drives.

TECHNICAL SPECIFICATIONS

► Version: open frame drive in 92 x 85 x 23 mm, equipped with screw-type connectors.
► Range of operating voltages: 24-48 VDC.
► Range of current: 2.6-4.4 Amp. Setting up to eight possible values by means of a dip-switch.
► Microstepping: 400, 800, 1.600 and 3.200 steps/revolution. Setting by means of dip-switches.
► Automatic current reduction at motor standstill.
► Management of the current profile setting by means of a dip-switch.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
► Warranty: 24 months.

 Contact Us About This Product

Ezi-LinearStep series

Precision Hybrid Stepper linear Actuators

Ezi-LinearStep, Hybrid Stepper Linear Actuators can offer High precision and strong durability for various applications. Motor Characteristics can be customized. Ezi-Linearstep, Hybrid Stepping Linear Actuator series offers High Precision and Durability for various applications. Anti-Backlash Nut adoption enables Minimization of Backlash (±0.0127mm) and maximizes Anti-Abrasion and Efficiency of screw (Max. 85%) by Teflon Coated Screw. Life cycle of screw and nut has much improved (Max. Over 5Mil Cycles). In addition, Ball screw option and various Customization is available. Also combination with Ezi-SERVO and S-SERVO Series are available to support various Field Networks.
  • High Stiffness and Durability of Linear Stepping Motor
  • Compact Design of High Performance of Linear Actuator
  • High Precision Linear Actuator (0.001mm/Step)
  • High Speed of Linear Motion (Max. 300mm/s)
  • Max. Thrust Force 2000N
  • Non-Captive / External / Captive Type Series
  • Closed Loop System
  • No Hunting
  • No Gain Tuning
  • Fast Response
 Download Catalog
Spec
Avaiable travel per stop: 0.006mm, 0.01mm, 0.02mm, 0.04mm max thrust force is up to 40N
Motor Characteristics(not limited as the list, customization is welcome)
Motor type Current/phase Res./phase Inductance lead wire no. Motor Length
Lâ–¡H2028-0304 0.3A 20Ohm+/-10% 5.0mH+/-20% 4 28mm
Lâ–¡H2028-0504 0.5A 5Ohm+/-10% 1.5mH+/-20% 4 28mm
Lâ–¡H2038-0604 0.6A 10Ohm+/-10% 5.5mH+/-20% 4 38mm
Available lead screws and travel per step:
screw Dia.

(in)

screw dia.

(mm)

Lead

(in)

Lead

(mm)

Travel per step

(mm)*

0.138 3.5052 0.048 1.2192 0.0061
0.138 3.5052 0.079 2 0.01
0.138 3.5052 0.158 4 0.02
0.138 3.5052 0.315 8 0.04
* values truncated.
Available travel per stop from 0.003175mm to 0.05mm max thrust force is up to 80N
Motor Characteristics(not limited as the list, customization is welcome)
Motor type Current/phase Res./phase Inductance lead wire no. Motor Length
Lâ–¡11H2032-0204 0.2A 68Ohm+/-10% 39mH+/-20% 4 32mm
Lâ–¡11H2032-0504 0.5A 10Ohm+/-10% 6mH+/-20% 4 32mm
Lâ–¡11H2032-1004 1.0A 2.1Ohm+/-10% 1.5mH+/-20% 4 32mm
Lâ–¡11H2032-0674 0.67A 6.8Ohm+/-10% 4.9mH+/-20% 4 45mm
Lâ–¡11H2032-0954 0.95A 3.2Ohm+/-10% 5.0mH+/-20% 4 45mm
Lâ–¡11H2032-2004 2.0A 1.1Ohm+/-10% 1.1mH+/-20% 4 45mm
Available lead screws and travel per step:
screw Dia.

(in)

screw dia.

(mm)

Lead

(in)

Lead

(mm)

Travel per step

(mm)*

0.188 4.7625 0.025 0.635 0.0032
0.188 4.7752 0.050 1.27 0.0063
0.188 4.7752 0.100 2.54 0.0127
0.188 4.7752 0.200 5.08 0.0254
0.188 4.7752 0.400 10.16 0.0508
* values truncated.
Available travel per stop from 0.003mm to 0.048768mm, max thrust force is up to 200N
Motor Characteristics(not limited as the list, customization is welcome)
Motor type Current/phase Res./phase Inductance lead wire no. Motor Length
Lâ–¡8H2035-0504 0.5A

14Ohm+/-10% 20mH+/-20% 4 35mm

Lâ–¡8H2035-1004 1.0A

3.5Ohm+/-10% 4mH+/-20% 4 35mm

Lâ–¡8H2035-1504 1.5A

1.5Ohm+/-10% 2.0mH+/-20% 4 35mm

Lâ–¡8H2045-0504 0.5A

28Ohm+/-10% 40mH+/-20% 4 45mm

Lâ–¡8H2045-1004 1.0A

5.5Ohm+/-10% 7.6mH+/-20% 4 45mm

Lâ–¡8H2045-2004 2.0A

1.2Ohm+/-10% 1.95mH+/-20% 4 45mm

Available lead screws and travel per step:
screw Dia.

(in)

screw dia.

(mm)

Lead

(in)

Lead

(mm)

Travel per step @1.8deg

(mm)

Travel per step @0.9deg

(mm)*

0.250 6.35

0.048

1.2192

0.006 0.0030

0.250 6.35

0.050

1.227

0.006 0.0032

0.250 6.35

0.063

1.6002

0.008 0.0040

0.250 6.35

0.096

2.4384

0.012 0.0061

0.250 6.35

0.100

2.54

0.012 0.0064

0.250 6.35

0.192

4.8768

0.024 0.0122

0.250 6.35

0.250

6.35

0.031 0.0159

0.250 6.35

0.330

8.382

0.041 0.0210

0.250 6.35

0.384

9.7536

0.048 0.0244

* values truncated.
Availabel travel per step from 0.003mm to 0.127mm, max thrust force is up to 200N
Motor Characteristics(not limited as the list, customization is welcome)
Motor type Current/phase Res./phase Inductance lead wire no. Motor Length
Lâ–¡17H2034-0504 0.5A

16Ohm+/-10% 23mH+/-20% 4 34mm

Lâ–¡17H2034-1004 1.0A

4.2Ohm+/-10% 6mH+/-20% 4 34mm

Lâ–¡17H2034-1504 1.5A

1.8Ohm+/-10% 3mH+/-20% 4 34mm

Lâ–¡17H2047-0504 0.5A

23Ohm+/-10% 50mH+/-20% 4 47mm

Lâ–¡17H2047-1204 1.2A

3.5Ohm+/-10% 9mH+/-20% 4 47mm

Lâ–¡17H2047-2504 2.5A

1.0Ohm+/-10% 1.5mH+/-20% 4 47mm

Available lead screws and travel per step:
screw Dia.

(in)

screw dia.

(mm)

Lead

(in)

Lead

(mm)

Travel per step @1.8deg

(mm)

Travel per step @0.9deg

(mm)*

0.250 6.35

0.048

1.2192

0.006 0.0030

0.250 6.35

0.050

1.27

0.006 0.0032

0.250 6.35

0.063

1.6002

0.008 0.0040

0.250 6.35

0.096

2.4384

0.012 0.0061

0.250 6.35

0.100

2.54

0.012 0.0064

0.250 6.35

0.192

4.8768

0.024 0.0122

0.250 6.35

0.250

6.35

0.031 0.0159

0.250 6.35

0.330

8.382

0.041 0.0210

0.250 6.35

0.384

9.7536

0.048 0.0244

0.375 9.525

0.025

0.635

0.003 0.0016

0.375 9.525

0.050

1.27

0.006 0.0032

0.375 9.525

0.063

1.6002

0.008 0.0040

0.375 9.525

0.083

2.1082

0.010 0.0053

0.375 9.525

0.100

2.54

0.012 0.0064

0.375 9.525

0.125

3.175

0.015 0.0079

0.375 9.525

0.167

4.2418

0.021 0.0106

0.375 9.525

0.200

5.08

0.025 0.0127

0.375 9.525

0.250

6.35

0.031 0.0159

0.375 9.525

0.375

9.525

0.047 0.0238

0.375 9.525

0.384

9.7536

0.048 0.0244

0.375 9.525

0.500

12.7

0.063 0.0318

0.375 9.525

1.000

25.4

0.127 0.0635

* values truncated.
All above screws can be used on LS style actuator, LN actuator can only select dia 6.35mm screws

Availabel travel per step from 0.003mm to 0.127mm, max trrogh force is up to 800N
Motor Characteristics(not limited as the list, customization is welcome)
Motor type Current/phase Res./phase Inductance lead wire no. Motor Length
Lâ–¡23H2046-1004 1.0A

5.0Ohm+/-10% 15.7mH+/-20% 4 46mm

Lâ–¡23H2046-2004 2.0A

1.4Ohm+/-10% 4.1mH+/-20% 4 46mm

Lâ–¡23H2046-3004 3.0A

0.6Ohm+/-10% 1.9mH+/-20% 4 46mm

Lâ–¡23H2066-1004 1.0A

12Ohm+/-10% 35mH+/-20% 4 66mm

Lâ–¡23H2066-2504 2.5A

2.0Ohm+/-10% 7.6mH+/-20% 4 66mm

Lâ–¡23H2066-4004 4.0A

0.7Ohm+/-10% 2.1mH+/-20% 4 66mm

Available lead screws and travel per step:
screw Dia.

(in)

screw dia.

(mm)

Lead

(in)

Lead

(mm)

Travel per step @1.8deg

(mm)

Travel per step @0.9deg

(mm)*

0.375 9.525

0.025

0.635

0.003 0.0016

0.375 9.525

0.050

1.27

0.006 0.0032

0.375 9.525

0.063

1.6002

0.008 0.0040

0.375 9.525

0.083

2.1082

0.010 0.0053

0.375 9.525

0.100

2.54

0.012 0.0064

0.375 9.525

0.125

3.175

0.015 0.0079

0.375 9.525

0.167

4.2418

0.021 0.0106

0.375 9.525

0.200

5.08

0.025 0.0127

0.375 9.525

0.250

6.35

0.031 0.0159

0.375 9.525

0.375

9.525

0.047 0.0238

0.375 9.525

0.384

9.7536

0.048 0.0244

0.375 9.525

0.500

12.7

0.063 0.0318

0.375 9.525

1.000

25.4

0.127 0.0635

0.625 15.875

0.100

2.54

0.012 0.0060

0.625 15.875

0.125

3.175

0.015 0.0075

0.625 15.845

0.200

5.08

0.025 0.0125

0.625 15.875

0.250

6.35

0.031 0.0155

0.625 15.875

1.000

25.4

0.127 0.0635

* values truncated.
All above screws can be used on LS style actuator. LN actuators can only select dia 9.525mm screws.

Availabel travel per step from 0.00508mm to 0.127mm, max thrust foecw is up to 2000N
Motor Characteristics(not limited as the list, customization is welcome)
Motor type Current/phase Res./phase Inductance lead wire no. Motor Length
Lâ–¡34H2080-1304 1.3A 9.2Ohm+/-10% 51mH+/-20% 4 80mm
Lâ–¡34H2080-3004 3.0A

1.6Ohm+/-10% 8.8mH+/-20% 4 80mm
Lâ–¡34H2080-5504 5.5A

0.52Ohm+/-10% 2.9mH+/-20% 4 80mm
Available lead screws and travel per step:
screw Dia.

(in)

screw dia.

(mm)

Lead

(in)

Lead

(mm)

Travel per step @1.8deg

(mm)

Travel per step @0.9deg

(mm)*

0.625 15.875

0.100

2.54

0.012 0.0051

0.625 15.875

0.125

3.175

0.015 0.0064

0.625 15.845

0.200

5.08

0.025 0.0102

0.625 15.875

0.250

6.35

0.031 0.0127

0.625 15.875

1.000

25.4

0.127 0.0508

* values truncated.
 Contact Us About This Product

RTA Stepping motor drive open-frame A-CSD 02.V ( ADVANCED )

New series of bipolar microstep stepping motor drives, specifically developed for applications sensitive to acoustic noise and vibration. Significant evolution of the CSD series, preserving backward mechanical, electrical and applicative compatibility.   Target: advanced applications requiring high precision, smoothness of movement and low acoustic noise.
 Download Catalog

HIGHLIGHTS


► Full digital microstepping drive.
► Adaptive microstepping up to 3.200 step/rev.
► Intelligent management of the current profile that achieves good results in terms of smoothness of movement, low noise and vibration control.
► A highly sophisticated control system, preserving anyhow the traditional ease of use of R.T.A. drives.

TECHNICAL SPECIFICATIONS

► Version: open frame drive in 92 x 85 x 22 mm, equipped with screw-type connectors.
► Range of operating voltages: 24-48 VDC.
► Range of current: 0.7-2.4 Amp. Setting up to eight possible values by means of a dip-switch.
► Microstepping: 400, 800, 1.600 and 3.200 steps/revolution. Setting by means of dip-switches.
► Automatic current reduction at motor standstill.
► Management of the current profile setting by means of a dip-switch.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
► Warranty: 24 months.

 Contact Us About This Product

RTA Stepping motor drive open-frame BSD 02.V ( ADVANCED )

New series of microstep stepping motor drives specifically developed for small and mid-size stepping motors. Ultra-compact and optimized design to reduce space and cost, combined with Adaptive Microstepping technology ensuring noise and vibration suppression.   Target: simple and effective motion control solutions requiring low power, high precision, smoothness of movement and low acoustic noise.   Ideal solution to replace integrated circuits and self-made, low power drives. The perfect choice for small routers, medical, 3D printers and all types of compact machines.
 Download Catalog

HIGHLIGHTS


► Full digital microstepping drive.
► Adaptive microstepping up to 3.200 step/rev.
► Intelligent management of the current profile that achieves good results in terms of smoothness of movement, low noise and vibration control.
► A highly sophisticated control system, preserving anyhow the traditional ease of use of R.T.A. drives.

TECHNICAL SPECIFICATIONS

► Version: open frame drive in 78 x 68 x 21 mm, equipped with screw-type connectors.
► Range of operating voltages: 24-48 VDC.
► Range of current: 0.7-2.2 Amp. Setting up to four possible values by means of a dip-switch.
► Microstepping: 400, 800, 1.600, 3.200 steps/revolution. Setting by means of a dip- switches.
► Automatic current reduction at motor standstill.
► Management of the current profile setting by means of a dip-switch.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
► Warranty: 24 months.

 Contact Us About This Product

RTA Stepping motor drive boxed CSD J4

Series of ministep bipolar chopper drives with an on-board programmable motion controller:  
  • Can be used for the interfacing, through RS485 serial line, with a central control system
  • Can be used as an independent unit.
  • Presence of a dedicated analog input for the setting of motor target speed.
  Target: low-power applications needing a programmable motion controller with small size motors.
 Download Catalog
Spec

HIGHLIGHTS


► Microstepping function up to 4.000 step/rev.
► Setting of the motor target speed sampled at the beginning of the motion sequence (before motor starts running).
► Programmable motion controller allowing the connection up to 48 drives on a single serial line.
► External fans not needed: ideal both for mounting inside a metallic electrical cabinet and for stand-alone applications.

TECHNICAL SPECIFICATIONS

► Version: drive housed in a metallic box 90 x 99 x 30 mm, equipped with plug-in connectors.
► Range of operating voltages: 24-48 VDC.
► Range of current: 2.6-4.4 Amp. Setting up to four possible values by means of a serial line.
► Microstepping: 400, 800, 1.600, 3.200 and 500, 1.000, 2.000, 4.000 steps/revolution. Setting by means of a serial line.
► Automatic current reduction at motor standstill.
► Protections:
  -Protection against under-voltage and over-voltage.
  -Protection against a short-circuit at motor outputs.
  -Overtemperature protection with thermal sensor.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
► Possibility to set Pull-UP or Pull-Down inputs.
► Warranty: 24 months.

ANALOG INPUT TO CONTROL MOTOR SPEED

► Target speed setting by means of analog input sampled at the beginning of the motion sequence (before motor starts running).
► Input setting: 0-5 VDC or 0-10 VDC
► Frequency range:
  - 3000 Hz- 48000 Hz (with ramp)
  - 0 Hz-4100 Hz or 0 Hz-510 Hz (without ramp)
► Possibility of matching with potentiometers of 2.2 KOhm.

PROGRAMMABLE MOTION CONTROLLER

► Communication through RS485 serial line; up to 48 drives can be connected on a single serial line. One instruction can be broadcasted to all drives.
► Various types of available instructions, as for example: indexed run with ramp, free run with ramp, indexed run without ramp, run with a programmable braking distance, zero research. Space can be programmed in relative or absolute mode (linear or circular).
► Number of steps for indexed ramp up to ± 8.338.607 in relative or absolute mode, speed from 1 to 24.000 Hz in standard resolution and from 1 to 48.000 Hz in high resolution, ramp times from 16 to 1440 msec.
► Availability of instructions to develop motion programs as, for example: conditional jump, time delay, program block and recovery, I/O management, FOR NEXT loop.
► Possibility to control the execution of 8 previously stored motion programs through hardware inputs. Accordingly, the drive can be used in stand-alone applications, without serial connection.
► 8 inputs and 3 outputs, all optically insulated. Among them 1 input and 1 output are freely programmable.
► Memory of 128 instructions kept also at drive switched-off and three run time instructions.
► A utility working in Windows® is available in order to ease motion programs development by the user.

 Contact Us About This Product

RTA Stepping motor drive boxed CSD 94

Series of ministep bipolar chopper drives, suitable for driving medium-low power two-phase stepping motors, with four, six or eight terminals. Highly compact, easy to use and cost effective solution. This system is designed for easy mounting inside a metallic electrical cabinet.   Target: low power applications without special configuration requirement, but needing high precision, smoothness of movement and low acoustic noise.
 Download Catalog

HIGHLIGHTS


► Microstepping function up to 3.200 step/rev.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Separated connectors for logic signals and power connections.
► Pull-up and pull-down input signals ease interfacing with the most commonly used control systems.

TECHNICAL SPECIFICATIONS

► Version: drive housed in a metallic box in 90 x 99 x 21 mm, equipped with plug-in connectors.
► Range of operating voltages: 24-48 VDC.
► Range of current: 2.6-4.4 Amp. Setting up to eight possible values by means of a dip-switches.
► Microstepping: 400, 800, 1.600, 3.200 steps/revolution. Setting by means of a dip- switches.
► Automatic current reduction at motor standstill.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Possibility to set Pull-UP or Pull-Down inputs.
► Possibility to switch off motor current with an external logic signal.
► High efficiency CHOPPER with MOSFET final stage output.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Warranty: 24 months.

 Contact Us About This Product

RTA Stepping motor drive boxed CSD 92

Series of ministep bipolar chopper drives, suitable for driving medium-low power two-phase stepping motors, with four, six or eight terminals. Highly compact, easy to use and cost effective solution. This system is designed for easy mounting inside a metallic electrical cabinet.   Target: low power applications without special configuration requirement, but needing high precision, smoothness of movement and low acoustic noise.
 Download Catalog

HIGHLIGHTS


► Microstepping function up to 3.200 step/rev.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Separated connectors for logic signals and power connections.
► Pull-up and pull-down input signals ease interfacing with the most commonly used control systems.

TECHNICAL SPECIFICATIONS

► Version: drive housed in a metallic box in 90 x 99 x 21 mm, equipped with plug-in connectors.
► Range of operating voltages: 24-48 VDC.
► Range of current: 0.7-2.4 Amp. Setting up to eight possible values by means of a dip-switches.
► Microstepping: 400, 800, 1.600, 3.200 steps/revolution. Setting by means of a dip- switches.
► Automatic current reduction at motor standstill.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Possibility to set Pull-UP or Pull-Down inputs.
► Possibility to switch off motor current with an external logic signal.
► High efficiency CHOPPER with MOSFET final stage output.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Warranty: 24 months.


SUGGESTED MOTOR/DRIVE COUPLING

 Contact Us About This Product

RTA Stepping motor drive open-frame CSD 04.V

Series of ministep bipolar chopper drives, suitable for driving medium-low power two-phase stepping motors, with four, six or eight terminals. Highly compact, easy to use and cost effective solution. This system is designed for easy mounting inside a metallic electrical cabinet.   Target: low power applications without special configuration requirement, but needing high precision, smoothness of movement and low acoustic noise.
 Download Catalog

HIGHLIGHTS


► Microstepping function up to 3.200 step/rev.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Separated connectors for logic signals and power connections.
► Pull-up and pull-down input signals ease interfacing with the most commonly used control systems.

TECHNICAL SPECIFICATIONS

► Version: open frame drive in 92 x 85 x 23 mm, equipped with screw-type connectors.
► Range of operating voltages: 24-48 VDC.
► Range of current: 2.6-4.4 Amp. Setting up to eight possible values by means of a dip-switches.
► Microstepping: 400, 800, 1.600, 3.200 steps/revolution. Setting by means of a dip- switches.
► Automatic current reduction at motor standstill.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Possibility to set Pull-UP or Pull-Down inputs.
► Possibility to switch off motor current with an external logic signal.
► High efficiency CHOPPER with MOSFET final stage output.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Warranty: 24 months.


SUGGESTED MOTOR/DRIVE COUPLING

 Contact Us About This Product

RTA Stepping motor drive open-frame CSD 02.V

Series of ministep bipolar chopper drives, suitable for driving medium-low power two-phase stepping motors, with four, six or eight terminals. Highly compact, easy to use and cost effective solution. This system is designed for easy mounting inside a metallic electrical cabinet.   Target: low power applications without special configuration requirement, but needing high precision, smoothness of movement and low acoustic noise.
 Download Catalog

HIGHLIGHTS


► Microstepping function up to 3.200 step/rev.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Separated connectors for logic signals and power connections.
► Pull-up and pull-down input signals ease interfacing with the most commonly used control systems.

TECHNICAL SPECIFICATIONS

► Version: open frame drive in 92 x 85 x 22 mm, equipped with screw-type connectors.
► Range of operating voltages: 24-48 VDC.
► Range of current: 0.7-2.4 Amp. Setting up to eight possible values by means of a dip-switches.
► Microstepping: 400, 800, 1.600, 3.200 steps/revolution. Setting by means of a dip- switches.
► Automatic current reduction at motor standstill.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Possibility to set Pull-UP or Pull-Down inputs.
► Possibility to switch off motor current with an external logic signal.
► High efficiency CHOPPER with MOSFET final stage output.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Warranty: 24 months.

 Contact Us About This Product

RTA Stepping motor drive boxed NDC 96

Series of ministep bipolar chopper drives, suitable for driving medium power two-phase stepping motors, with four, six or eight terminals. Compact, easy to use and cost effective solution. This system is designed for easy mounting inside a metallic electrical cabinet.   Target: medium and medium-low power applications without special configuration requirement, but needing great dynamic performance, high reliability, low acoustic noise and mechanic vibrations reduction.
 Download Catalog

HIGHLIGHTS


► Microstepping function up to 4.000 step/rev.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Separated connectors for logic signals and power connections.
► Optoinsulated and differential input and output signals ease interfacing with the most commonly used control systems.

TECHNICAL SPECIFICATIONS

► Version: drive housed in a metallic box in 110 x 108 x 34 mm, equipped with plug-in connectors.
► Range of operating voltages: 24-75 VDC.
► Range of current: 1.9-6 Amps. Setting up to eight possible values by means of a dip-switch.
► Microstepping: 400, 500, 800, 1.000, 1.600, 2.000, 3.200 and 4.000 steps/revolution. Setting by means of a dip- switch.
► Automatic current reduction at motor standstill.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Optoinsulated inputs compatible with differential control signals.
► Possibility to switch off motor current with an external logic signal.
► High efficiency CHOPPER with MOSFET final stage output.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Available a version with built-in oscillator, with speed range from 14 to 450 rpm. Setting by means of dip-switches.
► Warranty: 24 months.

 Contact Us About This Product

RTA Stepping motor drive boxed NDC 94

Series of ministep bipolar chopper drives, suitable for driving medium power two-phase stepping motors, with four, six or eight terminals. Compact, easy to use and cost effective solution. This system is designed for easy mounting inside a metallic electrical cabinet.   Target: medium and medium-low power applications without special configuration requirement, but needing great dynamic performance, high reliability, low acoustic noise and mechanic vibrations reduction.
 Download Catalog

HIGHLIGHTS


► Microstepping function up to 4.000 step/rev.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Separated connectors for logic signals and power connections.
► Optoinsulated and differential input and output signals ease interfacing with the most commonly used control systems.

TECHNICAL SPECIFICATIONS

► Version: drive housed in a metallic box in 110 x 108 x 34 mm, equipped with plug-in connectors.
► Range of operating voltages: 24-75 VDC.
► Range of current: 0.6-2 Amps. Setting up to eight possible values by means of a dip-switch.
► Microstepping: 400, 500, 800, 1.000, 1.600, 2.000, 3.200 and 4.000 steps/revolution. Setting by means of a dip- switch.
► Automatic current reduction at motor standstill.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Optoinsulated inputs compatible with differential control signals.
► Possibility to switch off motor current with an external logic signal.
► High efficiency CHOPPER with MOSFET final stage output.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Available a version with built-in oscillator, with speed range from 14 to 450 rpm. Setting by means of dip-switches.
► Warranty: 24 months.

 Contact Us About This Product

RTA Stepping motor drive open-frame NDC 06.V

Series of ministep bipolar chopper drives, suitable for driving medium power two-phase stepping motors, with four, six or eight terminals. Compact, easy to use and cost effective solution. This system is designed for easy mounting inside a metallic electrical cabinet.   Target: medium and medium-low power applications without special configuration requirement, but needing great dynamic performance, high reliability, low acoustic noise and mechanic vibrations reduction.
 Download Catalog

HIGHLIGHTS


► Microstepping function up to 4.000 step/rev.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Separated connectors for logic signals and power connections.
► Optoinsulated and differential input and output signals ease interfacing with the most commonly used control systems.

TECHNICAL SPECIFICATIONS

► Version: open frame drive in 101 x 94 x 25 mm, equipped with screw-type connectors.
► Range of operating voltages: 24-75 VDC.
► Range of current: 1.9-6 Amps. Setting up to eight possible values by means of a dip-switch.
► Microstepping: 400, 500, 800, 1.000, 1.600, 2.000, 3.200 and 4.000 steps/revolution. Setting by means of a dip- switch.
► Automatic current reduction at motor standstill.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Optoinsulated inputs compatible with differential control signals.
► Possibility to switch off motor current with an external logic signal.
► High efficiency CHOPPER with MOSFET final stage output.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Available a version with built-in oscillator, with speed range from 14 to 450 rpm. Setting by means of dip-switches.
► Warranty: 24 months.

 Contact Us About This Product

RTA Stepping motor drive open-frame NDC 04.V

Series of ministep bipolar chopper drives, suitable for driving medium power two-phase stepping motors, with four, six or eight terminals. Compact, easy to use and cost effective solution. This system is designed for easy mounting inside a metallic electrical cabinet. Target: medium and medium-low power applications without special configuration requirement, but needing great dynamic performance, high reliability, low acoustic noise and mechanic vibrations reduction.
 Download Catalog

HIGHLIGHTS


► Microstepping function up to 4.000 step/rev.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Separated connectors for logic signals and power connections.
► Optoinsulated and differential input and output signals ease interfacing with the most commonly used control systems.

TECHNICAL SPECIFICATIONS

► Version: open frame drive in 101 x 94 x 25 mm, equipped with AMP connectors.
► Range of operating voltages: 24-75 VDC.
► Range of current: 0.6-2 Amps. Setting up to eight possible values by means of a dip-switch.
► Microstepping: 400, 500, 800, 1.000, 1.600, 2.000, 3.200 and 4.000 steps/revolution. Setting by means of a dip- switch.
► Automatic current reduction at motor standstill.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Optoinsulated inputs compatible with differential control signals.
► Possibility to switch off motor current with an external logic signal.
► High efficiency CHOPPER with MOSFET final stage output.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
► Available a version with built-in oscillator, with speed range from 14 to 450 rpm. Setting by means of dip-switches.
► Warranty: 24 months.

 Contact Us About This Product

RTA Stepping motor drive boxed A-NDC 96 ( ADVANCED )

New series of bipolar microstep stepping motor drives, specifically developed for applications sensitive to acoustic noise and vibration.  
  • Significant evolution of the NDC series, preserving backward mechanical, electrical and applicative compatibility.
  • Target: advanced applications requiring high precision, smoothness of movement and low acoustic noise.
 
 Download Catalog

HIGHLIGHTS


► Full digital microstepping drive.
► Adaptive microstepping up to 12.800 step/rev (1/64).
► Intelligent management of the current profile that achieves good results in terms of smoothness of movement, low noise and vibration control.
► A highly sophisticated control system, preserving anyhow the traditional ease of use of R.T.A. drives.

TECHNICAL SPECIFICATIONS

► Version: drive housed in a metallic box in 110 x 108 x 34 mm, equipped with plug-in connectors.
► Range of operating voltages: 24-85 VDC.
► Range of current: 1.9 -6 Amps. Setting up to eight possible values by means of a dip-switch.
► Microstepping: 400, 800, 1.600, 3.200, 6.400 and 12.800 steps/revolution. Setting by means of a dip- switch.
► Management of the current profile setting by means of a dip-switch.
► Automatic current reduction at motor standstill.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
► Optoinsulated inputs to ensure best EM noise immunity.
► Warranty: 24 months.

 Contact Us About This Product

RTA Stepping motor drive boxed A-NDC 94 ( ADVANCED )

New series of bipolar microstep stepping motor drives, specifically developed for applications sensitive to acoustic noise and vibration.  
  • Significant evolution of the NDC series, preserving backward mechanical, electrical and applicative compatibility.
  • Target: advanced applications requiring high precision, smoothness of movement and low acoustic noise.
 Download Catalog

HIGHLIGHTS


► Full digital microstepping drive.
► Adaptive microstepping up to 12.800 step/rev (1/64).
► Intelligent management of the current profile that achieves good results in terms of smoothness of movement, low noise and vibration control.
► A highly sophisticated control system, preserving anyhow the traditional ease of use of R.T.A. drives.

TECHNICAL SPECIFICATIONS

► Version: drive housed in a metallic box in 110 x 108 x 34 mm, equipped with plug-in connectors.
► Range of operating voltages: 24-85 VDC.
► Range of current: 0.6 -2 Amps. Setting up to eight possible values by means of a dip-switch.
► Microstepping: 400, 800, 1.600, 3.200, 6.400 and 12.800 steps/revolution. Setting by means of a dip- switch.
► Management of the current profile setting by means of a dip-switch.
► Automatic current reduction at motor standstill.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
► Optoinsulated inputs to ensure best EM noise immunity.
► Warranty: 24 months.

 Contact Us About This Product

RTA Stepping motor drive open-frame A-NDC 06.V ( ADVANCED )

New series of bipolar microstep stepping motor drives, specifically developed for applications sensitive to acoustic noise and vibration.  
  • Significant evolution of the NDC series, preserving backward mechanical, electrical and applicative compatibility.
  • Target: advanced applications requiring high precision, smoothness of movement and low acoustic noise.
 Download Catalog

HIGHLIGHTS

► Full digital microstepping drive.
► Adaptive microstepping up to 12.800 step/rev (1/64).
► Intelligent management of the current profile that achieves good results in terms of smoothness of movement, low noise and vibration control.
► A highly sophisticated control system, preserving anyhow the traditional ease of use of R.T.A. drives.

TECHNICAL SPECIFICATIONS

► Version: open frame drive in 101 x 94 x 25 mm, equipped with screw-type connectors.
► Range of operating voltages: 24-85 VDC.
► Range of current: 1.9-6 Amps. Setting up to eight possible values by means of a dip-switch.
► Microstepping: 400, 800, 1.600, 3.200, 6.400 and 12.800 steps/revolution. Setting by means of a dip- switch.
► Management of the current profile setting by means of a dip-switch.
► Automatic current reduction at motor standstill.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction.* Adaptive microstepping.
► Optoinsulated inputs to ensure best EM noise immunity.
► Warranty: 24 months.

 Contact Us About This Product

RTA Stepping motor drive open-frame A-NDC 04.V ( ADVANCED )

New series of bipolar microstep stepping motor drives, specifically developed for applications sensitive to acoustic noise and vibration.  
  • Significant evolution of the NDC series, preserving backward mechanical, electrical and applicative compatibility.
  • Target: advanced applications requiring high precision, smoothness of movement and low acoustic noise.
 Download Catalog

HIGHLIGHTS

► Full digital microstepping drive.
► Adaptive microstepping up to 12.800 step/rev (1/64).
► Intelligent management of the current profile that achieves good results in terms of smoothness of movement, low noise and vibration control.
► A highly sophisticated control system, preserving anyhow the traditional ease of use of R.T.A. drives.

TECHNICAL SPECIFICATIONS

► Version: open frame drive in 101 x 94 x 25 mm, equipped with screw-type connectors.
► Range of operating voltages: 24-85 VDC.
► Range of current: 0.6-2.0 Amp. Setting up to eight possible values by means of a dip-switch.
► Microstepping: 400, 800, 1.600, 3.200, 6.400 and 12.800 steps/revolution. Setting by means of dip-switches.
► Automatic current reduction at motor standstill.
► Management of the current profile setting by means of a dip-switch.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
► Optoinsulated inputs compatible to ensure best EM noise immunity.
► Warranty: 24 months.

 Contact Us About This Product

RTA Stepping motor drive open-frame ADW 06.V (with Intelligent Speed Controller)

ADW is the new R.T.A. electronic drive designed for all applications where accurate SPEED CONTROL is needed. The motor velocity can be regulated in 3 ways:  
  • Analog voltage input
  • External potentiometer
  • Internal speed settings
The extended ADW power range (24-75 VDC, 0.65 - 6.0 Amps) and its versatility (4 Modes of Operation) allow to access to a wide variety of application fields.
 Download Catalog

HIGHLIGHTS

► Any speed-regulated applications with variable or pre-set velocity setting.
► Conveyors:
- Single belt transport
- Multi belt transport with high precision position/speed synchronization.
► Jog or adjustment movements.

TECHNICAL SPECIFICATIONS

► Version: open frame drive in 122 x 93.5 x 25 mm, equipped with screw-type connectors.
► Range of operating voltage: 24-75 VDC.
► Range of current: 1.9-6 Amp. Easy setting of values by means of a dip-switch.
► Wide speed range: 0.8 rpm to 2,000 rpm. Continous operation zone up to approx 400 rpm, depending on motor choice.
► 64 internally selectable preset speed.
► 0-5Vdc or 0-10Vdc selectable analog command range.
► Low & High-speed motion profile.
► Adjustable internal acceleration/deceleration ramp.
► Voltage source for potentiometer available at connector.
► Auto-stop function.
► All opto-insulated digital inputs.
► Sync-out for multi-Axis synchronization.
► Over-voltage, short-circuit and thermal protection.
► Warranty: 24 months.

BENEFITS VS. CONVENTIONAL INVERTERS + AC MOTORS + WORM GEARBOX SETUP.

► Broader and more accurate speed range [0.8 rpm to 2,000 rpm].
► Zero-deviation motor speed control at any speed. [motor speed is not affected by variable factors like load, inertia or friction].
► The motors automatically act as brake at zero speed.
► Easy multi-axis synchronization in Position and Speed.
► No need of worm gearbox due to the high-torque at low rotation speed range [0-400 rpm].
► Smaller dimension: overall size < 1/3 compared with traditional AC Asynchronous sets.
► Lower weight.

 Contact Us About This Product

RTA Stepping motor drive open-frame ADW 04.V ( with Intelligent Speed Controller )

ADW is the new R.T.A. electronic drive designed for all applications where accurate SPEED CONTROL is needed. The motor velocity can be regulated in 3 ways:  
  • Analog voltage input
  • External potentiometer
  • Internal speed settings
  The extended ADW power range (24-75 VDC, 0.65 - 6.0 Amps) and its versatility (4 Modes of Operation) allow to access to a wide variety of application fields.
 Download Catalog

HIGHLIGHTS

► Any speed-regulated applications with variable or pre-set velocity setting.
► Conveyors:
- Single belt transport
- Multi belt transport with high precision position/speed synchronization.
► Jog or adjustment movements.

TECHNICAL SPECIFICATIONS

► Version: open frame drive in 122 x 93.5 x 25 mm, equipped with screw-type connectors.
► Range of operating voltage: 24-75 VDC.
► Range of current: 0.65-2 Amp. Easy setting of values by means of a dip-switch.
► Wide speed range: 0.8 rpm to 2,000 rpm. Continous operation zone up to approx 400 rpm, depending on motor choice.
► 64 internally selectable preset speed.
► 0-5Vdc or 0-10Vdc selectable analog command range.
► Low & High-speed motion profile.
► Adjustable internal acceleration/deceleration ramp.
► Voltage source for potentiometer available at connector.
► Auto-stop function.
► All opto-insulated digital inputs.
► Sync-out for multi-Axis synchronization.
► Over-voltage, short-circuit and thermal protection.
► Warranty: 24 months.

BENEFITS VS. CONVENTIONAL INVERTERS + AC MOTORS + WORM GEARBOX SETUP.

► Broader and more accurate speed range [0.8 rpm to 2,000 rpm].
► Zero-deviation motor speed control at any speed. [motor speed is not affected by variable factors like load, inertia or friction].
► The motors automatically act as brake at zero speed.
► Easy multi-axis synchronization in Position and Speed.
► No need of worm gearbox due to the high-torque at low rotation speed range [0-400 rpm].
► Smaller dimension: overall size < 1/3 compared with traditional AC Asynchronous sets.
► Lower weight.

 Contact Us About This Product